I believe the problem is with the Meraki cloud. Earlier, in the same call, the engineer said this: “We had a recent issue which alerted for the same: "Ethernet uplink speed degraded" error, but that was due to an alerting issue and the engineering team disabled the alert for all customers. The alert is now enabled and contains fixes to properly alert. The reason you see the alerts across multiple sites is because the alert was disabled, which may have hidden valid alerts, and now those alerts are properly shown. The next step is to investigate the physical layer or negotiation settings." ... View more

I opened a Meraki TAC, but they didn't help me much with that. "Please start by performing a cable test, checking the negotiation settings on the switch, and potentially cycling the switch ports."     I have around 400 APs on several different networks, connected to several different switches, but I've noticed that all the APs that are connected to 100mbit are showing the degradation alert. I did a test with any AP near me, where it was connected to a meraki switch and the cabling was ok, it wasn't showing any error alerts. I forced the port where the AP is connected and mysteriously the alert appears simply because the AP is connected to a 100 Mbit port (forced), after which I did a cable test on the meraki where all the tests were completed successfully. I sent this to the meraki engineer and his reply was simply “I do not see any issues with the Port or AP. I will move this case to closed as proper investigation needs to occur through the before mentioned checks.” And closed ticket. ... View more

Any feedback? ... View more

I am having a problem with the cameras on the live stream using RSTP from nothing crashes...only on RSTP but on the meraki dashboard it keeps working...   When I restart it works again. I was thinking about updating to MV5.0 ....mas without the possibility to do the rolback is complicated. ... View more

Tested on windows 11 that had the problem and it solved the problem. ... View more

I made a request as a wish for the Meraki team to check out the possibility, if you can support by giving a kudo or something like that and sharing to support it may be that Meraki will put it into production.   https://community.meraki.com/t5/Make-a-Wish-Feature-Requests/MX-blocking-message/m-p/134353#M262 ... View more

I had the same problem in the status informed ok "green", when I went to check in the event logs, Event type informed that: "Unable to contact domain controller " alternating between "Connected to Domain Controller" . To solve this I checked that in the "domain admin" field I didn't need to inform the domain followed by the \ Put only the domain user name. ... View more

I was not getting the rules to apply to AD users, then I checked in the documentation that in the "domain admin" field we don't need to enter the "domainname" before the user, after I removed it the rules were successfully applied to AD users.   I hope I have contributed ... View more