Hi hoping you be able to confirm if what I’m thing is correct or to suggest a better way of doing things.   We currently have a full MPLS network which we are about to terminate we’re moving to a full SD-wan solution with autovpn, with dual isps at each site.  At the DC we are going to have a MX250 which is going to terminate the autovpns and a MX84 that is going to be used as the default route out to the internet.  the plan is to set the MX250 as the default route out for the network. Then a default route will then point traffic to the MX84 if no route is found via autovpn   at the MX84 my idea is to then set a 0.0.0.0/0 route to the MPLS for the networks that don’t and will never exist via Autovpn. Flow preference is setup to direct internet traffic out WAN1   Do you think this would work or would I be best to define static routes on the MX250 to the routes that exist on the MPLS but still have the default route set to the mx84 as I want that to be the route out to the Internet..  thanks in advance!! ... View more