good morning 3 APs are a SW and the other 3 are in another SW, both SW belong to the same stack, which is formed by 5 SW. Some APs are also connected to those SW and they have no problem. ... View more

Good Morning, When I ping those six APs from the dashboard they are unreachable. I have also tried doing a cycle port but the result is the same, APs still appear in red, although as I mentioned ... Clients can connect to the SSID irradiated in those APs and navigate, access the internet, etc. The ports in the SW are configured in portchannel for each AP, running at 2 Gbps, with native vlan 1 and allowing the passage of all the vlan. The administration vlan is labeled in the AP. The other APs, which are 49, are configured in the same way and do not present the problem. on the dashboard appears "Unreachable" and "Unavailable because access point is offline" ... View more

Good morning Adam, Thanks for answering. I explain: Currently we have 55 AP MR52 of which only 6 have the aforementioned behavior. The other 49 APs work correctly with the same configuration in all APs. We have LACP configured for each AP, the ports are in native vlan 1 and DHCP is labeled an administration vlan (410) Last week everyone was working, but without traffic. But this week when there was already a lot of traffic (connected clients), this behavior appeared. Those 6 APs appear in red on the board, but physically the LED is green and you can navigate, access the internet. I do not know why this happens and I appreciate the help you can give me. ... View more