Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About DZ-POWER
DZ-POWER
Here to help
Member since Mar 15, 2021
Apr 15 2021
Community Record
13
Posts
1
Kudos
0
Solutions
Badges
Mar 24 2021
8:41 PM
1 Kudo
I went into the Netgear router ( usually it's 192.168.x.x) and logged with my credential and then set up a port forwarding for port 500 and 4500 ( UDP) so it goes from my router and forward into the MX64 and that solved the problem . my home set up is a Modem Router that connect to the Mx64 and then it goes to Meraki switch and Wireless AP .
... View more
Mar 22 2021
6:08 AM
so everything is working fine now , thanks all for the help and guidance and sorry for the delay replying
... View more
Mar 16 2021
7:55 PM
I was able to connected to the Meraki VPN but now i do not have internet access
... View more
Mar 16 2021
5:21 PM
still can't get it to work Mar 16 20:18:56 Non-Meraki / Client VPN negotiation msg: purged IPsec-SA proto_id=ESP spi=1485482832. Mar 16 20:18:56 Non-Meraki / Client VPN negotiation msg: IPsec-SA established: ESP/Transport 192.168.0.24[4500]->73.61.19.6[4500] spi=38369682(0x2497992) Mar 16 20:18:56 Non-Meraki / Client VPN negotiation msg: IPsec-SA established: ESP/Transport 192.168.0.24[4500]->73.61.19.6[4500] spi=128748962(0x7ac8da2) Mar 16 20:18:52 Non-Meraki / Client VPN negotiation msg: purged IPsec-SA proto_id=ESP spi=92950814. Mar 16 20:18:52 Non-Meraki / Client VPN negotiation msg: IPsec-SA established: ESP/Transport 192.168.0.24[4500]->73.61.19.6[4500] spi=1485482832(0x588aab50) Mar 16 20:18:52 Non-Meraki / Client VPN negotiation msg: IPsec-SA established: ESP/Transport 192.168.0.24[4500]->73.61.19.6[4500] spi=6085396(0x5cdb14) Mar 16 20:18:49 Non-Meraki / Client VPN negotiation msg: purged IPsec-SA proto_id=ESP spi=3541076808.
... View more
Mar 16 2021
9:07 AM
I tried it and it mess up some of my application for example i used ABS-B for plane spotting and it was not working so i had to stop the port forwarding and it went back to normal .why is port forwarding messing up the other applications? is it affecting all the ports? below is exactly what i did does it look right i'm confused about the Use the same port range for Internal port
... View more
Mar 15 2021
8:45 PM
Hi i just want to be able to connect via RDP when i travel how can i set up the port forwarding in my netgear i'm really struggling what is the Internal IP and external ip i need to use as forwarding ?? router IP is 192.168.0.1 MX64 IP is 192.168.128.1 if i put the router ip address or the mx64 in the browser i get the same page result ( see below) do i need to route from Router to MX64 ( route from 192.168.0.24 to mx ip address) i thing the solution to my problem is the router port forwarding for 500 and 4500 and struggling to get it done Your client connection Client IP 192.168.128.28 Client MAC Speed test Run a browser-based speed test to check your connection to this security appliance. Run speed test Security Appliance details Network name Hardware address Product model MX64 Ethernet This security appliance is directly connected to a local network. IP address: 192.168.0.24 Internet This security appliance is connected to the Internet. Cisco Meraki cloud This security appliance is successfully connected to the Cisco Meraki cloud.
... View more
Mar 15 2021
7:54 PM
that is the problem i'm having and cant figure out can you tell me what ip i need to put in the port forward does it goes from 192.168.0.24 ( router) to 192.168.128.1 (MX64) ( UDP 500 and 4500) VPN-PPTP Service Type TCP External Starting Port 500 (1~65535) External Ending Port 500 (1~65535) Use the same port range for Internal port Internal Starting Port 500 (1~65535) Internal Ending Port 500 Internal IP address ?? External IP Address ??
... View more
Mar 15 2021
6:48 PM
only thing i see in the event log in meraki is intrusion detected started I have the client vpn laptop connected to hotspot and i get the l2tp connection attempt failed because of security layer using the windows vpn connection client for windows10 ( i tried the ip address and server name )
... View more
Mar 15 2021
6:32 PM
sorry my ip 192.168.128.1 ( MX 64) the router ip is 192.168.0.1 ( Gateway) WAN IPV4 192.168.0.24 i'm really struggling . please help me in the meraki the LAN setting is single LAN subnet 192.168.128.0/24 when i want create the client VPN and under subnet it list an example as 192.168.1.0/24 ( do i need to use that ??) What subned for a client VPN i need to put in ?
... View more
Mar 15 2021
6:07 PM
i tried 172.16.1.0/24 that and got the error message Settings could not be saved. Please verify that your connection is working and try again. my ip under ipconfig are 12.168.128xxx i do not see any 172 ip range
... View more
Mar 15 2021
6:04 PM
I put in 192.168.1.0/24 when i created the subnet ( that is what is used as an example) do i need to create that subnet ?? i'm confused under addressing and VLAN i have single lan 192.168.128.0/24 and MX ip 192.168.128.1 if i do a ping of 192.168.1.0/24 ping 192.168.1.0 Pinging 192.168.1.0 with 32 bytes of data: Reply from 192.168.128.1: Destination host unreachable. Reply from 192.168.128.1: Destination host unreachable. Reply from 192.168.128.1: Destination host unreachable. Reply from 192.168.128.1: Destination host unreachable. Ping statistics for 192.168.1.0: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
... View more
Mar 15 2021
5:55 PM
I'm going crazy on 48 hrs trying to set up vpn what is the simplest way to do it ? what subnet need to used under the vpn creation. i tried to put in the one from when i do ipconfig and it would not take it been trying for 48hrs and going crazy.
... View more
Mar 15 2021
5:44 PM
I have been trying to set up a vpn and going on crazy for the last 48 hrs. spent lots of time in google and can't get the VPN to work ( tested on Phone and Macbook and laptop) I have a C3700-100NAS Cable Modem router that is connected to the MX64 and I have a Switch ( MS120-8LP) Wireless AP . The Router is connected to my ISP Cable coax and i have an ethernet cable to goes from the router into the MX64 Internet port. LAN 1 on the MX64 goes directly into the Switch on port 1 The AP is connected to port 2 on the switch and i have other device connected to the ports ( PS4, IPTV, Docking station, etc) The router is in Route mode when i check the setting under advanced ( i can connect to the router by entering the IP into the browser or connection an ethernet cable into the router port ( it has 2 port ) I have tried to set up the VPN from Security & SD-WAN and no luck getting my phone ( connected on LTE) or laptop ( connected on a hotspot) . I can't see any tracking under event logs WAN 1 xx.xx.xx.xx Active ( it's an ISP IP address) hostname : xxxxx-xxxxx-xxxx-xxxxx-xxxxxx.dynamic-m.com subnet : 192.168.1.0/24 ( I type that in the field) and i tried to create in the addressing and VLANS and i get There were errors in saving this configuration: Vlan subnets cannot overlap with the client VPN subnet. DNS : use google WINS Server : no wins server Shared secret : ( i type a simple password) authentication : meraki cloud
... View more
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 1 | 7424 |
© 2024 Cisco Systems, Inc.
