Meraki

Community
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

About Blackseal

Re: MR30H as a repeater

by in Wireless
‎Mar 29 2018 12:31 AM
‎Mar 29 2018 12:31 AM
Thanks for the advice. I've already tried the information in this link but to no avail. The MR30H is showing in the dashboard fine when connected to the LAN, there is only one SSID enabled and it is for both 2.4 and 5GHz. I remove the uplink cable to the MR30H, power it using a PoE injector but it does not mesh. ... View more

MR30H as a repeater

by in Wireless
‎Mar 28 2018 5:52 PM
‎Mar 28 2018 5:52 PM
Does any know if it is possible to use a MR30H as a repeater that is powered by a PoE injector? I need to connect 1 device that does not have wifi capabilities so thought I could connect the device to port 1 on the MR30H and then use a PoE injector to power the AP through it's uplink port. In theory the MR30H should not get an IP address on the uplink port so knows it is not on the wired LAN and should then try to mesh with my MR42. I have left the MR30H and MR42 beside each other for a few hours at a time but they never mesh. If I connect the MR30H to the wired network it appears fine in the dashboard so there is nothing wrong with the AP. ... View more
Labels:
© 2024 Cisco Systems, Inc.