Might be good to add the below when a CU is using NAT Traversal: Ports used for IPsec tunneling: Source UDP port range 32768-61000 Destination UDP port range 32768-61000 ... View more

You can renew early without losing out on the current term. If buying and applying a 3yr license 1 month before the current one ends, your 3yr will start from the expiry date of the current one. ... View more

Can Client VPN be used on a one arm VPN concentrator (MX)? If so, what is the trick to allow the client to connect? ... View more

Hello, I cannot connect to VPN using L2TP on a Mac. I tried to connect using Windows and works perfectly. When I changed to Cisco IPsec, it seems that is working, but for some reason, it cannot ping to the VPN which means it's not really connected (and the internet connection becomes down). Is there any solution to that? I'm using a M1 MacBook Air with the latest version of Mac OS. ... View more

Please add code token-based MFA support in SAML and Radius authentication scenarios. "Authenticator App Push" and "Phone Call" methods (driven by IdP back-end) works fine but the Authenticator code or SMS code methods (where Cisco AnyConnect VPN client should present field to enter the code) don't work and inherited the legacy behavior from the legacy VPN. Thank you ... View more

my primary feedback would be that this page https://meraki.cisco.com/support/#policies:eol and this page https://documentation.meraki.com/General_Administration/Other_Topics/Product_End-of-Life_(EOL)_Policies are often not in sync with regards to the product list.    for example right now the first link ends at the poe injector while the other page has more recent EoX announcements. more than once customers have pointed to one doc and i gave to steer them to whatever the most recent link is to get accurate EoX info. ... View more

Pretty good though the English could be slightly clearer in the first few paragraphs:   Here, PC A wants to send traffic to PC B at IP address 192.168.1.6. - I'd insert 'at IP address 192.168.1.5' after 'PC A'.  I'm also not sure if 'Here, ' adds anything.   Within a layer 2 switch environment exists a broadcast domain.  - a comma and the word 'there' should be inserted after 'environment'   It might also be worth mentioning that L3 routing can be done by an MX at the end of the article? ... View more

Please tell us your thoughts about this documentation article! Do you need any clarifications? Have questions? Think it's great?   Note that your comments will be public here on this documentation page and also on the Meraki Community Documentation Feedback board. ... View more