Meraki Community

Shinm · ‎Jul 14 2022

Hi Stoerfaktor, In the end, nothing was done, but we were informed that the problem no longer occurred and the issue was closed. Thank you very much.

Shinm · ‎Jul 3 2022

Hi Stoerfaktor, I recommended a firmware update to the customer, but was told that they are using MR33 on another NETWORK with firmware Ver 25.11 and is not experiencing any problems with the connection between MR33 and IPHONE SE3. By the way, both the NETWORK where the problem is occurring and the NETWORK where the problem is not occurring are fixed 2.4GHz Channel. I will check the situation a little more.

Shinm · ‎Jul 3 2022

Hi Stoerfaktor, Thanks for the very helpful performance information(almost 2month). With this track record, I can recommend the farm up to my clients. Clients basically don't want to do farm up voluntarily. Thank you.

Shinm · ‎Jun 30 2022

Unable to connect to MR33 since changing from iPhone 8 to iPhone SE3. After connecting, it happen "unknown reason" and "disassociated because client interface was disable" at event log. - It not had any problems until now. - AP is MR33. - It appears to be trying to connect to various APs as a maybe handover(from event log). - I've tried change SSID setting from band steering to dual band, but it didn't help. - MR firmware version is 27.7.1. I know this one is old, but it's not easy to change firmware because customer site. Do you know any Wi-Fi connection issues related to the iPhone SE3? Are there any configuration changes that would be effective? Maybe version up firmware is best?

Meraki Community

About Shinm

Shinm

Community Record

Badges

Re: Unable to connect to MR33 since changing from iPhone 8 to iPhone SE3.

Re: Unable to connect to MR33 since changing from iPhone 8 to iPhone SE3.

Re: Unable to connect to MR33 since changing from iPhone 8 to iPhone SE3.

Unable to connect to MR33 since changing from iPhone 8 to iPhone SE3.