Meraki

SmokeyMtnMan · ‎Jul 13 2022

I know this is an old post, but wanted add some information to help those out there struggling. I have used Merak AP's for years and WiFi calling works provided its on an SSID that does not disable LAN access. For some reason, when you create a Guest network and diallow LAN access, wifi calling does not work. Web browsing works fine in this scenario. But on my internal SSID's, WIFI calling works without issue. I have not determined why the SSID's with Deny LAN block the Wifi calling, but its most likely related to a specific port or service on the internal LAN that is blocked by default in the Deny LAN Access of the guest network. Meraki equipment is great except for their crazy lead times to get new hardware.

SmokeyMtnMan · ‎Jan 30 2022

Hello, We have a Meraki MX 105 set to passthrough mode that is behind a MX 100 on the edge. The MX 105 was put in place to isolate one major Windows system. On the Threat Protection page, it shows Protected networks and lists the default recommended network. My question is should the Protected networks only list the one subnet the windows box is part of or should it only contain the Windows x.x.x.x/32 address for the host itself. Our goal is to protect this system since it is no longer supported by Microsoft and will no longer have security patches available. Since its such a critical system for our company and they have kicked the can down the road for so long, we need to add this layer of security until the system is replaced. I appreciate any input from the community.

Meraki

Community

About SmokeyMtnMan

SmokeyMtnMan

Community Record

Badges

Re: Wi-Fi calling not working over Meraki AP

MX 105 in Passthrough mode

Re: Wi-Fi calling not working over Meraki AP