Meraki

Community

About Prisma

Re: Problems of ip assignment with MR42 in bridge mode

by in Wireless
‎Feb 15 2018 4:12 AM
‎Feb 15 2018 4:12 AM
No, The native vlan is for default (1). The other vlans not tagging here. But change my configuration, only permitted the other vlans (with command allowed). Attachment the configuration. interface GigabitEthernet1/0/21 description AP-PRUEBA switchport trunk allowed vlan 1,55,20 switchport mode trunk end My questions are: 1.-should be configuration the native vlan (switchport trunk native vlan 55) and allowed the others vlans (switchport trunk allowed vlan 1,20). For the host receive IP of the DHCP (DHCP vlan 20)? 2.Should be configuration additional configuration on SSID? Tagging vlan option? Thks for you reply ... View more

Problems of ip assignment with MR42 in bridge mode

by in Wireless
‎Feb 14 2018 6:14 PM
‎Feb 14 2018 6:14 PM
I have configured a port in trunk mode on a cisco 2960 switch, this connects to the AP MR42. When generating the SSID and configure it in bridge mode. The MR42 APs take IP from the administration vlan (55), but when connecting a host to the AP (passing through the association process) it does not deliver IP from the internal servers that deliver the DHCP configured for the other VLANs. I need to know if this is a configuration problem in the SSID?. Thanks for your reply   Configuration SW   interface GigabitEthernet1/0/21 description AP-PRUEBA switchport mode trunk end   Configuracion de AP MR42 ... View more
© 2024 Cisco Systems, Inc.