Client-side ... View more

There's a regfix going around which supposedly fixes this issue to permit TLS 1.2 again. Understand your risks etc.. before implementing ... View more

All I'll say is I guess you're lucky to be in a place where you can make those calls around explicit 5 GHz only and the stakeholders back it. We all know the junk that exists in 2.4, but for me at least if there is a single user or service that requires it then the exec aren't going to OK shutting it down. ... View more

Not too fussed as it's just an EA/Beta release after all buuuut I did get on board the hype train after the announcement post and we're still at the station 😣 ... View more

+1 for MTU, we had issues with this exact problem and Access-Rejects due to timeouts. Setting the relevant NPS policy (Windows server) with a Framed-MTU of 1344 fixed it for us ... View more

Yes I'm keen to see people's feedback on whether there is a noticeable improvement in the stability! ... View more

Interesting they still have 3x stable versions with 30.5 moving to RC!     ... View more

Correct, not sure what datasheet I was reading at the time there! ... View more

Yup I'm seeing this for the first time as well, interesting to see MR 29.5.1 in there ... View more

Interesting, hadn't checked that thread in a while so good to know at least a root cause has been established. Definitely not linked to Intel driver version as well then? ... View more

There's no flex radio with the 9164s, only the 9166 has the flex 5/6 GHz radio ... View more

I'm more in shock that someone beat you to the release notes post @cmr 😉 ... View more

Agree with @TBHPTL, using non-DFS channels if possible will remove the chance of weird behaviour with CAC windows and backoffs ... View more

Little high on the TxPower @PhilipDAth given Meraki's Tx value is from the radio and not EIRP? ... View more

Only 950 Mbps? But my home router box says I can get up to 10.8Gbps 😛 /s ... View more

We have similar with our CW9164s, 6 GHz not enabled in our reg. domain yet so Dashboard shows the 6 GHz radio supposedly sat in 5 GHz channel 161. ... View more

I think I'll disagree with that one to be honest @alemabrahao! I'm simply suggesting there could be some better clarity in the official docos that's all.   Have a good one!   ... View more

I understand the support scope, but the fact is the docos state it won't even power on when using .3af power and that is not the case with the real-world behaviour, irrespective of any stability-type issues.   The installation guide states outright "The AP will not power up when powered by a single 802.3af power source". The datasheet table suggests the same thing along with the '802.3af not supported' disclaimer.   Do you not agree that after reading the docos it could be confusing for some users who do accidentally power it at .3af, as you stated you did, and find that it does power on and operate as normal? ... View more

The sites are remote from me but I haven't had support tickets reporting issues, not to say the users just aren't reporting them however!   Have not tested whether it's dropping the radio count and/or RJ-45 speeds when running at .3af though ... View more

Support-wise Meraki will only support it when running 802.3at or .3bt, but they do still have radios enabled and servicing clients when running at .3af.   Not that I want to do that of course, it was just surprising at the time of posting to find that it was actually still doing things which were at the odds with the doco wording ... View more

Thanks for the response, good to get another set of eyes to verify! I'll lodge a feedback to ask for local timezoning ... View more

Maybe I'm misreading the docs but the indoor DFS requirement for UNII-3 in the UK was removed in April 2021 by OFCOM was it not? (IR 2030, Page 111, summary of version history 1.14). April 2021 announcement advising changes came in to effect 12 May 2021 (page 21, 4.20 and page 21/22, 4.23).   'Useless' is probably a harsh term but... really? It could just be the choice of wording, but that reads to me like you're just telling a customer to suck it up, ignoring the fact they have just lost functionality in a production environment for something that is out of their control. Anyone with static channel plan including UNII-3 channels will have to go and re-do those designs to account for the loss of those channels in the interim period before 'certification' takes place. ... View more

Quick update to say that after speaking with support the response was essentially 'this is not a supported operating mode for this model' and that was about it. I asked for documentation to at least be updated to clarify things further and left it at that.   We still want to ensure our 9164s are running at .3at power but at least it's takes some of the user impact away if they run at low power for a short time until the source is fixed up. ... View more

I'm wondering if it's more of a clarity issue such as 'no radios enabled with 802.3af if you are trying to enable all three client radios'    Anyone in a 6 GHz approved reg. domain able to replicate running the CW9164 @ 802.3af with all three radios configured for use?   I'll report back with what support make of it all ... View more