status quo: since giving the amazon fire tv stick a static dhcp lease, it works so far...I will report back soon. ... View more

@SoCalRacer wrote: MR53 with FW 27.1 - Working? MR46 with FW 27.1 - Not Working? -> correct, maybe the WPA3 transistion mode is causing that.   Where is DHCP being run from? -> MX84 is running the DHCP   What is upstream from the MR? -> MS250   Can you give it a DHCP reservation and does that resolve it? -> Reservation is set, I will report back.   ... View more

@GIdenJoe wrote: Not all devices will accept a transition mode WPA2/3, especially IoT devices.   I suggest you try to circumvent the most obvious issue and try another SSID with WPA2 only and see if it connects there. -> Will do that and report back, maybe the transistion mode is causing the issue   If you have wireless capture tool you could try to see what your device does, but usually in this case you'll see the client not even bothering to send an auth request frame because it did not like what was in the probe response.   If that helps then you could check for the Firestick support if there is a software version that fixes this. -> latest firmware is already installed   Edit: I didn't notice your problem went away after rebooting the MR. But does it keep working?  Maybe disconnect your TV first and try re-connecting. -> after rebooting the MR every evening, the FireTV stick is connecting again   ... View more