Meraki

ThomasB · ‎Feb 2 2018

Hi, i've try to configure the port in trunk mode and it doesn't work ... An interessant thing, when i configure DHCP server on Fortinet Firewall instead of DHCP relay, it works. I don't understand 😞

ThomasB · ‎Jan 31 2018

Hi, i've capture some packet and i see BOOTP : 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from e0:cb:bc:30:XX:XX, length 304, xid 0x294aaXXX, Flags [none] Client-Ethernet-Address e0:cb:bc:30:XX:XX Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Discover Client-ID Option 61, length 7: ether e0:cb:bc:30:XX:XX Hostname Option 12, length 13: "me0cbbc30XXXX" Vendor-Class Option 60, length 6: "MERAKI" Parameter-Request Option 55, length 7: Subnet-Mask, Domain-Name, Default-Gateway, BR Hostname, Domain-Name-Server, MTU

ThomasB · ‎Jan 31 2018

Hi, yes, it works. The laptop gets an IP address. Thanks

ThomasB · ‎Jan 31 2018

Hi, sorry for my bad english, i'm from France. I've 2 Meraki device, 1 AP MR33 and 1 switch MS220. The topology is : AP MR33 ---> MS220 --> Switch Avaya --> Firewall Fortinet --> Internet The network configuration is : VLAN 34, 10.1.2.0/24, gateway 10.1.2.254 (NIC on Fortinet firewall), DHCP relay is configured on Fortinet firewall. The problem is : the Switch MS220 receive an IP address by DHCP but AP MR33 doesn't receive an IP address from DHCP. The LED on the AP is blinking Orange ... I've try this topology : AP MR33 ---> Switch Avaya --> Firewall Fortinet --> Internet , it doens't work ... The DHCP server is a WS2012R2. Thanks for your answers. Thomas

Meraki

Community

About ThomasB

ThomasB

Community Record

Badges

Re: AP doesn't receive IP address

Re: AP doesn't receive IP address

Re: AP doesn't receive IP address

AP doesn't receive IP address