Meraki Community

M_berget · ‎Feb 24 2021

Traffic was blocked on the Azure firewall.

M_berget · ‎Aug 12 2020

Hi, again! I was wondering if the MX will send syslogs of legacy equipment or if it only will send logs from Meraki switches and AP's.

M_berget · ‎Jun 9 2020

Hi again! I have a follow up question, there are several networks where we run two MX. Will only the primary MX send logs to the syslog server og will both do it? Best regards Mberget.

M_berget · ‎Jun 9 2020

Hi! Thank you for the tips. There were no site-to-site VPN firewall rule blocking the traffic. However have multiple networks started to send event logs to the server without that I did a thing. I was unable to ping the syslog server, but it is most likely blocking ICMP, since I tried to ping it from a network who worked as well. I can see that there are going traffic towards the syslog server, so I will follow your other step and verify that the appliance can reach the server.

M_berget · ‎Jun 4 2020

Hi! I have a case where several networks don't send the event logs to the syslog server while other networks in the same template do send their logs. Is it also possible to verify that these log sources are inactive and that there is no error causing the log source to not send log events? Do anyone have anyone experience regarding this issue? See the picture below for the tags applied for the server:

Meraki Community

About M_berget

M_berget

Community Record

Badges

Re: Syslog server not getting the event logs.

Re: Syslog server not getting the event logs.

Re: Syslog server not getting the event logs.

Re: Syslog server not getting the event logs.

Syslog server not getting the event logs.

Re: Syslog server not getting the event logs.