Hi All,   I have following situation: I have range of 8 public ip addresses (/29) routed to WAN1 public IP. Let's call them Public_IP_1 to Public_IP_8 On Internal network, I have 4 subnets (VLANs): 192.168.1.0/24 192.168.2.0/24 192.168.3.0/24 192.168.4.0/24.   I'm trying to do following (like I have on current non-Meraki device): all outgoing traffic from 192.168.1.0/24 should be nat'd to Public_IP_3 all outgoing traffic from 192.168.2.0/24 should be nat'd to Public_IP_4 all outgoing traffic from 192.168.3.0/24 should be nat'd to Public_IP_5 all outgoing traffic from 192.168.4.0/24 should be nat'd to Public_IP_6   outgoing traffic from SMTP server to anywhere to port 25 should be nat'd to Public_IP_7.   I checked on Traffic shaping page this where support point me to, but don't know how to do it.. If you have two different connections (ie. WAN1 and WAN2), it can be done, but I have range of 8 addresses, routed to WAN1 public IP, and WAN2 port is not in use.   I was looking on 1:1, 1:many, port forward.... can't do it... I hope this can be done on such device (MX84) as it can be done on much cheaper devices   I hope I missed something to make it work as it is critical for company I work for.   Thank you all in advance. Regards, Ivica ... View more