Meraki

Community

About TreyT

Re: Site to Site VPN no onsite DHCP server

by in Security & SD-WAN
‎May 10 2020 4:58 PM
‎May 10 2020 4:58 PM
Thank you. I apologize for my ignorance, but I’m very new to this. If I were to assign static ip addresses in the Mx device, could I then go into the lmhost file and add the ip-device name, and then be able to find the device on the other lan? ... View more

Re: Site to Site VPN no onsite DHCP server

by in Security & SD-WAN
‎May 10 2020 3:50 PM
‎May 10 2020 3:50 PM
At both locations I have setup 2 vlans, one for the ip camera systems and one for the pc/printers. I have allowed VLAN1 to the vpn on each of the Mx devices. I am using the Mx for DHCP at each site also. VLAN 1 at site 1 is using 192.168.128.0/24, VLAN 1 at site 2 is using 192.168.127.0/24. I can ping across the vpn tunnel and get a response, or if I go to network-add a device and specify the printers ip at the other site I am able to make a connection. The issue I’m having is if I search for the pc’s on the other side of the tunnel to try and share files I can’t find them.    ... View more

Site to Site VPN no onsite DHCP server

by in Security & SD-WAN
‎May 10 2020 1:55 PM
‎May 10 2020 1:55 PM
Hi all, let me start by saying I'm extremely new to the IT game.  I recently setup a mx device at two locations.  The goal is to be able to share files over the vpn tunnel.  I setup site to site vpn configuration, and the vpn status is showing no issues.  I'm able to ping a computer succesfully on the other end of the tunnel.  I also tested that if i search for a printer by ip im able to connect to it.  The issue i'm having is that none of the devices can find each other by searching the network.  I do not have any form of on site dhcp server setup and i'm assuming that is my issue.  Is there a way to get the two mx devices to share dhcp info?  If not is there an easy to use dhcp server program I can setup on in windows 10 pro? Thanks in advance for any help ... View more
© 2025 Cisco Systems, Inc.