Meraki

Community
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

About JustinM

Re: Cisco 7925G wifi not getting IP adddress

by in Wireless
‎Jan 23 2018 11:19 AM
‎Jan 23 2018 11:19 AM
Yesterday I noticed the Meraki switch reporting crc errors on the AP Switch port. I quick google found https://community.meraki.com/t5/Wireless-LAN/MR33-CRC-align-errors/td-p/2162   Last night I pushed out the Stable Release Candidate to my MR33. Today without making any changes the 7925G wifi phone it has registered with Call Manager.   Something in MR 25.9 seems to have fixed that issue. ... View more

Re: Cisco 7925G wifi not getting IP adddress

by in Wireless
‎Jan 15 2018 9:26 AM
‎Jan 15 2018 9:26 AM
Hmm weird that it works then at my other locations that are using Cisco APs.   Anyone using these phone and have them working? ... View more

Re: Cisco 7925G wifi not getting IP adddress

by in Wireless
‎Jan 14 2018 9:39 PM
‎Jan 14 2018 9:39 PM
@PhilipDAth wrote: Can a normal notebook connect to the same SSID as being used by the phone and get an IP address ok? Yes I have connected a laptop to voice ssid. It does get a ip via dhcp.   ... View more

Re: Cisco 7925G wifi not getting IP adddress

by in Wireless
‎Jan 14 2018 9:37 PM
‎Jan 14 2018 9:37 PM
@PhilipDAth wrote: So this is a WiFi connected phone? Yes the 7925G is a WiFi phone.   Is the SSID configured for bridge mode? Yes it is   What is doing the DHCP forwarding? Ip helper address on the vlan at the cisco router. Meraki recognises dhcp server from the wired phone and laptop I tested.   Have you tried a manual release/renew of the IP address on the phone? Well I have power cycled the phone multiple times that should do it.   ... View more

Cisco 7925G wifi not getting IP adddress

by in Wireless
‎Jan 14 2018 7:55 PM
‎Jan 14 2018 7:55 PM
I am deploying my first Meraki switch(MS120-8FP) and ap(MR33) at a new branch location. I am having issue with Cisco 7925G phones getting ip addresses via dhcp from a Windows DHCP server at the main office. The phones work without issue on our aging Cisco APs at the main location and presumably other offices that I have these same phones deployed at. Wired phones get IP address from DHCP on same VLAN and a windows laptop also got an IP via DHCP when connecting to the voice SSID on the Meraki AP.   Packet captures dont seem to show any thing but an ARP "Who has 6.49.30.115? Tell 0.0.0.0" This was all Meraki support was able to see.   I have ran through some of the Meraki guides but see no change. Actually some contradict each other in some spots.   Anyone have any tips for getting these phones working?   ... View more
My Accepted Solutions
View all
© 2024 Cisco Systems, Inc.