Meraki

Jacob01 · ‎May 4 2020

Thanks Philip, but I am not using two (2) MX 100s. I am only using one (1) MX 100 for this. So again if you see the diagram I provided for better clarity, I have two (2) Cisco 9400s sperate (no stack) in a HSRP both going to the same MX100 firewall. That is what i am asking how to do the configurations for. Thank you

Jacob01 · ‎May 4 2020

Hi, I am looking for some recommendations, on how to configure, (1) MX 100 firewall, connected to (2) separate Cisco 9400 Core LAN switches in a HSRP redundancy setup. The Cores will have various L3 SVI VLANs for intervlan routing. I am unsure on what I need to do on the Cisco Cores and the MX100 to have a full redundant topology here with any issues or asymmetric routing. Also confused on how to configure the MX100 LAN interfaces going to each core. Any other useful info please share. Diagram below. Thank you!

Meraki

Community

About Jacob01

Jacob01

Community Record

Re: Configuration recommendations for 1 MX 100 firewall, connected to 2 Cis...

Configuration recommendations for 1 MX 100 firewall, connected to 2 Cisco c...