Hello, I have a 250 Mbps Internet Connection. If I use the Cable which is connected to the MR26 I get the full speed. But if I am connected via WIFI i just get about 100 Mbps and I am sitting just next to the AP MR26.   The Connection between the Access point (MR26) and Switch (MS220-8P) is 1000 Mbit Full Duplex:   Ethernet 1 1000 Mbit, full duplex MS220-8P / Port 7   The settings are more or less default     Also the Radio Settings are default:   The Dashboard Speed from the MR26 is about 140 Mbps         And this is the output of the my.meraki.com test page     Has Anyone Any Idea which settings do I need to change to get more speed here? This should not be any Hardware limitations of the MR 26 right?   As this is mentioned in the datasheet:   The MR26 uses band steering to automatically serve 5 GHz-capable clients with the 5 GHz radio, maximizing capacity in the 2.4 GHz range for older 802.11b/g and 2.4 GHz-only clients.   https://meraki.cisco.com/lib/pdf/meraki_datasheet_MR26.pdf   ... View more