Hello,    Currently we have a Cisco ISR router that we have a PRI coming into today.  We are in the process of migrating to a new carrier for  MPLS and plan on retaining the existing PRI until we can move to a cloud based solution for VoiP.   As a result, we have to disconnect our old MPLS circuit which comes into the ISR router today, and bring the now MPLS circuit into the MX device, connect the ISR to a LAN port on the MX,   then have  a meraki switch connected to the ISR.  So my question is what is the best way  ensure that we have the ISR router to the MX65? Should I configure private ip  on a interface in the ISR, and point a static route from the MX to the ISR?     ... View more

Hello,    We are attempting to use the SFP ports on our MX400 as WAN uplinks(support has updated the beta firmware to support this). However, the MX400 doesn't seem to be able to reach the cloud once the firmware/configuration has been downloaded to the MX400.   We are using the MX400 in one arm concentrator mode if that makes any difference.   Does anyone out there have any experience with this?   ... View more