Meraki

Haris · ‎Feb 18 2020

Yes it was . I changed the native port to some other VLAN Now the VLAN 110 is functioning well.

Haris · ‎Feb 17 2020

VLAN 110 used as trunk for uplink ports in meraki switches And at same time VLAN 110 if assigned to any other ports doesn't works with dhcp. It gives apipa range only.

Haris · ‎Feb 13 2020

At a time only one VLAN can use the static route corresponds to the same subnet. other VLANs worked with own dhcp range but with dns issue. that is the reason we look to add static route for each VLAN. Here all VLAN has own dhcp..at current only one VLAN which has one static that becomes default is working fine with dns. when we tried to add more static route for each VLAN inorder to get proper gateway..system shows error the subnet already routed.

Haris · ‎Feb 12 2020

Facing issues with VLANs, as we need MS250 switches to handle the DHCP and L3 routing by itself After configuring the VLANs we cant add static routes, only one there by default. Because of this only one VLAN has the static route can run dhcp with internet access. other VLANs can run dhcp but without internet So we need to add multiple static routes. Can anyone provide solution for this issue.

Meraki

Community

About Haris

Haris

Community Record

Re: VLAN - Issue

VLAN - Issue

Re: MS250 - Static routes amd L3 routing

MS250 - Static routes amd L3 routing