Meraki

chwhite · ‎Feb 6 2020

Ok. Thank you for all of your help.

chwhite · ‎Feb 6 2020

We purchased a RJ-45 to SFP. Plugged the ethernet into the SFP then the SFP to the WAN\Internet port. I think the SFP was a cheap $15 variety QSFPTEK 1Gb to RJ45 type. No link activity on the SFP

chwhite · ‎Feb 6 2020

Screen capture for setup Above is the configuration tab for the firewall. I changed from DHCP to Static, entered an internal IP with gateway. No joy. Cannot get this thing connected to internet to configure.

chwhite · ‎Feb 6 2020

Yes. I am able to connect my laptop to the same interface on the switch, get an IP address and access to the internet. The WAN port on the firewall will not get an ip address via DHCP that is on our LAN.

chwhite · ‎Feb 6 2020

We are testing an MX 450 for a new firewall. How do I connect the firewall from its WAN port to a LAN switch? I physically do that, but it doesn't' have an internet connection. I configured a Static private IP on the WAN port. Is there something that I should be doing. The uplink WAN port is connected to an access interface on the switch.

Meraki

Community

About chwhite

chwhite

Community Record

Badges

Re: Test firewall connected to LAN

Re: Test firewall connected to LAN

Re: Test firewall connected to LAN

Re: Test firewall connected to LAN

Test firewall connected to LAN