Meraki

Community
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

About TSarge

Re: Guest Wi-Fi tunnel back to HQ MX

by in Wireless
‎Dec 5 2017 4:01 PM
‎Dec 5 2017 4:01 PM
Thanks.  I've used the Live Tools to verify that the MX can ping the AP LAN IP of 10.xx.15.9, and the AP can ping the MX management IP of 10.XXX.255.223.  3ms average response time, no packet loss.  It appears they have connectivity across my WAN.  There are no firewalls between the AP and the MX.   This one has me stumped.  I'm very appreciative of the suggestions.  Got any more? ... View more

Re: Guest Wi-Fi tunnel back to HQ MX

by in Wireless
‎Dec 5 2017 3:44 PM
‎Dec 5 2017 3:44 PM
The test fails "1 access point failed to connect to the concentrator"  SSID is set for VPN: tunnel data to a concentrator.  I only have the one MX appliance that is selected as the concentrator.  VLAN tagging is set to Concentrate traffic on VLAN XXX - Guest_WiFi.  VPN tunnel type is Full Tunnel.  All of these settings were suggested by Meraki support.   I have verified that the MX has a route to the network the branch AP lives on.  The "Meraki Magic" that happens in the cloud management is supposed to build the tunnel from the remote AP to the MX in my HQ, correct?  I've got to be missing something.... ... View more

Guest Wi-Fi tunnel back to HQ MX

by in Wireless
‎Dec 5 2017 3:30 PM
‎Dec 5 2017 3:30 PM
I have a working 7 AP (MR34) deployment in our HQ.  We drop corporate traffic onto a VLAN on the internal network.  We tunnel guest wi-fi to our MX100 which is DHCP server for Guest SSID.  All is well in HQ.   I'd like to begin deploying APs in our branch locations.  I was told I could deploy additional MR34/MR33 APs in our branches, drop corporate traffic on the internal network, AND tunnel guest wi-fi back to our MX100 in HQ for DHCP and internet access.  I can't seem to get this to work.  Internal corporate traffic works fine.  Guest wi-fi is not working.  I am using a template to deploy both SSIDs.  Guest SSID is set for VPN to "Tunnel to "my appliance" on VLAN xxx"  Branch locations are connected via 20Mb MPLS/ELAN services, layer 3, any to any connectivity.   Has anyone successfully deployed guest wi-fi in this manner?  Tunneling back to an MX at another location? ... View more
© 2024 Cisco Systems, Inc.