Meraki

Community

About Jentech

Re: MX64 VPN and RDP access

by in Security & SD-WAN
‎Nov 5 2019 1:06 PM
‎Nov 5 2019 1:06 PM
Thanks for the info. I'll have to think on what to do.   Cheers. ... View more

Re: MX64 VPN and RDP access

by in Security & SD-WAN
‎Nov 5 2019 12:26 PM
‎Nov 5 2019 12:26 PM
Ok, so I'm not sure how to fix that. I can't change the subnet of the network I'm currently in. My address is 192.168.0.175 at the moment. Again, my apologies if I sound out of my depth. ... View more

Re: MX64 VPN and RDP access

by in Security & SD-WAN
‎Nov 5 2019 12:06 PM
‎Nov 5 2019 12:06 PM
Thanks for the quick reply. Yes, the LAN behind the MX is 192.168.1.0/24. Yes, the PC's and the server point to the MX as the default gateway. It's full tunnel. The subnet I'm in before I connect to VPN is 192.168.0.0/23. If I add a port forward, I can RDP without VPN no problem, but that's not the solution I want.   ... View more

MX64 VPN and RDP access

by in Security & SD-WAN
‎Nov 5 2019 9:52 AM
‎Nov 5 2019 9:52 AM
Sorry if this has been covered before. To start, I'm no expert at this. I have a new MX64 that was installed by my internet provider, connected to a simple LAN with 1 server and 5 PCs. I can connect to the box through VPN, however I cannot ping or RDP to any computer behind the firewall. Outbound rule allows source 192.168.60.0/24 (VPN) access to 192.168.1.0/24 (LAN), however I cannot ping or RDP to the server or any computer behind the firewall. RDP through the old router worked fine before the box was installed. I have been through my IP tech support numerous times over the past week with no help. Can someone with some expertise please provide me with the correct setup information to allow me to RDP to any of the computers on the local LAN through the VPN. Thanks. ... View more
© 2025 Cisco Systems, Inc.