hi everyone, I have some difficulty connecting two networks, better if I explain:   I have an organization with two separate networks, Koysha OFFICE and Koysha CAMP each network has its own internet access on vsat C each satellite modem provides a / 29 public address each network has two MX100 (primary master and primary spare), each with its own public ip, connected on WAN1 to the network ports of the satellite modem each network has two MS350s stacked, therefore distinct and separate subnets and vlan the two networks are about 10 km apart between the two networks there is a hill that prevents direct linking to connect the two networks I set up four pairs of ubiquiti airfiber (L2): two couples go around the hill from the right and two couples go around the hill from the left; right link to 2Gb and left link to 1Gb   the first problem is the following: how can I connect the two networks so that they both reach all or some subnets?  the second problem is the following: how can i get two ip of the Koysha OFFICE satellite modem to the WAN 2 of the Koysha CAMP MX100 and get two ip of the Koysha OFFICE satellite modem to the WAN 2 of the Koysha CAMP MX100? the third problem is the following: how can I reach the eight airfibers which are managed by UNMS and AirControl Ubiquiti? the fourth problem is the following: since the two core stacks are rstp root for their respective networks ... how can I prevent it from going crazy?   any suggestions are appreciated, thanks ... View more