Meraki

Community
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

About wil

Re: MR30H Extending the LAN for wired clients (bridge mode) using integrate...

by Meraki Employee in Wireless
‎Oct 29 2017 2:39 PM
‎Oct 29 2017 2:39 PM
Hi Philip, thanks for the quick reply, have you had the opportunity to test this with a MR30H?  I have this working with other Meraki APs that do not have an integrated switch - so while I am assuming it would work with all the ports on the 30H (both uplink and integrated switch ports), my assumptions have not always panned out in the past.  Just wondering if anyone has tested this scenario with a 30H and can confirm.  Thanks! ... View more

MR30H Extending the LAN for wired clients (bridge mode) using integrated gi...

by Meraki Employee in Wireless
‎Oct 29 2017 1:24 PM
‎Oct 29 2017 1:24 PM
I'd like to use a MR30H to extend the LAN for wired clients.   I would like to know if the 30H will extend the LAN to just the uplink port on the back of the 30H, or will it extend the LAN to the integrated gigabit switch ports as well.   My use case is a location without wired connectivity where I have 3 devices (non-wireless) that I would like to connect via ethernet to the 30H and then have the 30H bridge that traffic to the bridge SSID.   The best practice guide "Extending the LAN with a Wireless Mesh Link" shows how to do this in the first example topology with an AP and an external switch (2 pieces of infrastructure equipment).  My goal would be to use the 30H with its integrated gigabit switch to eliminate the need for an external switch and still connect 3 wired ethernet devices (1 piece of infrastructure equipment, just the 30H).   Thanks! ... View more
© 2024 Cisco Systems, Inc.