About SymphonyOps

SymphonyOps · ‎06-24-2019

Thanks for the suggestion, Ben! But the problem here is that we have configured a static route to Office B from Office A. Now whatever the traffic we are sending to Office B is going through Aryaka only as the next hop for that static route is Aryaka Gateway IP. And we do not want to send a couple of VLAN'S through Aryaka but over the Internet. Please note that Office A is having Meraki but Office B is having ASA so AutoVPN's won't come in the picture. Is there any way that we can send few VLAN's through Aryaka and other through the Internet. Please note that the main issue is the static route configured for Office B and we can't remove it. Thanks

SymphonyOps · ‎06-24-2019

Hi Guys, We are using Aryaka as a WAN optimizer in our network. Hence we have created a static route in MX and given Aryaka Gateway IP as next hop. Thus, all VLAN traffic from office A to Office B is going through Aryaka. We have total 4 VLAN's in our network and out of them, we want 2 VLAN's traffic to go through S2S VPN over the Internet between Office A and Office B. Can you please help us in setting up this as we don't know how PBR works in Meraki? Thanks

SymphonyOps

Community Record

Re: PBR on MX-100

PBR on MX-100