Hello, I am in the process of switching over from an ASA5506 to the MX68.  When I switched over the MX68, I trunked port 3 on the MX68.  This port goes to a L2 HP switch.  The connecting port was tagged for both VLANs, 99 and 100.  No devices on VLAN 100 were able to get to the Internet or receive DHCP from the MX68, but devices connected to my Cisco AP and on VLAN 99 was getting DHCP and to the Internet.  Port 3 on the MX68 goes to Port 25 on the Hp Switch.   Am I missing something? Here are the configs:   HP2530:   vlan 1      name "DEFAULT_VLAN"      no untagged 1-23      untagged 25-28      tagged 24      no ip address      exit vlan 99      name "ReindersGuest"      tagged 22-23      no ip address      exit vlan 100      name "Users"      untagged 1-23      tagged 25      ip address 10.1.4.10 255.255.255.0      exit primary-vlan 100   ... View more

Hello,   I am migrating 13 ASAs, 1 MX100 for corporate location and 12 MX68 for remote branches.  What would be the best way to configure the MX100 side by side with corporate ASA?  I would like to have both the ASA and MX100 configured side by side, so when I start to deploy the remote branches, they will Auto site-to-site VPN.  Once all branches were deployed I would remove the ASA in the corporate office.    ... View more