Hi Pete, you must've missed it:   Source: https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page   That page is also linked to from this page: https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page   From a networking standpoint it's kind of logical. If there is no DHCP server available you need to set your own IP address. And to be able to reach the switch it needs to be in the same range.   Good that it worked out in the end!   ... View more