Meraki

BobSaget88 · ‎May 10 2019

Ive seen that page, but most of them seem to lack significant detail. Anyway, I was reading a section that mentioned I should make the MX65 the default gateway for all of my client's. Is that correct?

BobSaget88 · ‎May 3 2019

Please see my first post with the subnet info. Each subnet has its own default gw. The MX is on one subnet and the devices Im connecting to are on a different one. Each subnet has its own gw.

BobSaget88 · ‎May 3 2019

No, the default gateway is on another subnet. And yes, I am absolutely sure, these are network appliances Im trying to connect to.

BobSaget88 · ‎May 1 2019

Nope, I actually tried by IP first. In addition, none of these devices have any sort of firewall or network restrictions. I feel like Im missing something.

BobSaget88 · ‎May 1 2019

Hi, Im running a brand new MX65. Ive gone ahead and configured the Client VPN on the Meraki and a Local Client. The Meraki is on 192.168.128.0/24 My Local Subnet is on 192.168.1.1/24 Im able to successfully connect to the VPN and browse the internet through the MX, but I cannot access local resources on the 192.168.1.1/24 subnet. I tried creating a static route, but it complained about overlap. (" Static lan route subnets cannot be contained by (or be equal to) a client VPN subnet.") Ive tried disabling IPv6 on the client device and verified theres no split tunneling. Am I missing something?

Meraki

Community

About BobSaget88

BobSaget88

Community Record

Badges

Re: MX65 New Deployment - Small Network

Re: Client VPN

Re: Client VPN

Re: Client VPN

Client VPN