Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About HPP
HPP
Comes here often
Member since Apr 23, 2019
May 6 2019
Community Record
10
Posts
0
Kudos
0
Solutions
Badges
Apr 30 2019
1:10 AM
@GreenMan The upstream firewall allows connection on both ISP public IP address from WAN 1 Meraki connection. When the firewall failover to secondary ISP. Meraki could not able to register with secondary ISP public IP address even we allow time the Meraki box 10-15 minute to register.but it should be done quickly within 5 min as well as in AutoVPN case. Also, we have not rebooted the box as a part of the troubleshooting step. Instead, we unplugged the cable of the WAN 1 connection.
... View more
Apr 30 2019
1:10 AM
@GreenMan The upstream firewall allows connection on both ISP public IP address from WAN 1 Meraki connection. When the firewall failover to secondary ISP. Meraki could not able to register with secondary ISP public IP address even we allow time the Meraki box 10-15 minute to register.but it should be done quickly within 5 min as well as in AutoVPN case. Also, we have not rebooted the box as a part of the troubleshooting step. Instead, we unplugged the cable of WAN 1 connection.
... View more
Apr 25 2019
4:56 AM
@GreenMan Thanks for the reply, as you see in the diagram shared earlier in the post the Meraki box is using WAN1 connection as it passes through Active firewall where two ISP terminated on each firewall. So we did NAT the private IP address of WAN 1 Meraki IP address with both ISP public IP address dynamically. Secondly, configure the ISP failover condition at the firewall level. But Problem is Meraki registered with a dashboard via primary ISP public IP address. Once failover to secondary ISP it could not register with Secondary ISP IP address as cloud dashboard still trying to trace Primary ISP public IP address. Even, Dynamic DNS disabled on the Meraki box as well. Kindly let me know the reason why Meraki could not register with Secondary ISP Public IP address immediately when Primary ISP down at Perimeter level.
... View more
Apr 24 2019
5:14 AM
Please find below diagram for more reference where I want to use LAN 1 and 2 physical port for LAN segment and LAN 3 and 4 Physical port for an outside segment. The Meraki deployment would be NAT mode as we could not use WAN 1 and WAN2 Port in the Same Subnet. So would like to know the LAN ports can be used for Auto VPN.
... View more
Apr 24 2019
4:39 AM
@ Josper, Ok, but we could not place two WAN ports in the same subnet on standalone Meraki device. we want to attach the WAN side ports to Cascading switches ( daisy chain).
... View more
Apr 23 2019
8:39 PM
@PhilipDAth I want to register Meraki 84 with the cloud through LAN port. Also same LAN port will be using for AutoVPN. So would like to know whether it is possible through LAN port instead of WAN port as we are doing NAT at Edge Firewall.
... View more
Apr 23 2019
8:24 PM
@PhilipDAth What is the reason behind to connect WAN Port necessary even private IP address allocated to the WAN port? we have a kind of requirement that we require to connect meraki device WAN port to cascading switches and Layer 3 next hop is Edge firewall. Have you tried to register and AutoVPN through LAN Port? https://community.meraki.com/t5/forums/v4/forumtopicpage.kudosbuttonv2.kudoentity:kudoentity/kudosable-gid/26343?t:ac=board-id/security/message-id/2345/thread-id/2345&t:cp=kudos/contributions/tapletcontributionspage
... View more
Apr 23 2019
4:54 AM
Hi All, I have Meraki MX 84 device with firmware version 14.39. I want to deploy in a small remote network where two separate ISP terminated at the edge firewall. So, I would like to know if I use LAN port instead of WAN or Internet port to register with the cloud as well Auto VPN feature will work. If I hide behind the two different ISP public IP address at edge firewall. Secondly, we also want to test failover means one ISP connection down at the edge firewall still it connects to the cloud as well as Auto VPN with Second ISP public IP as we have NAT with two ISP public IP address.
... View more
© 2024 Cisco Systems, Inc.
