Meraki

Community

About suprimir

Re: MR42 set up a different IP subneting

by in Wireless
‎Apr 16 2019 3:58 AM
‎Apr 16 2019 3:58 AM
Hi dalmiroy2k, I cannot find the option to edit MR42 DHCP pool i am afraid. Can you let me know where i can find it? Best Regards. ... View more

Re: MR42 set up a different IP subneting

by in Wireless
‎Apr 12 2019 8:10 AM
2 Kudos
‎Apr 12 2019 8:10 AM
2 Kudos
Thanks @BrechtSchamp  and @kYutobi   Maybe it will be a good idea check a MX L3 model instead MR42, as in our office we need to create many SSID with diferents IP subnet.   Regards. ... View more

Re: MR42 set up a different IP subneting

by in Wireless
‎Apr 12 2019 6:17 AM
‎Apr 12 2019 6:17 AM
Thanks kYutobi,   I understand you 😉 but this is not what i am looking for as i don't want to create 10 vlans on Catalyst just for Wifi connection. I would like to leave it as simple as it is. Is there another model i can do this?   Regards. ... View more

Re: MR42 set up a different IP subneting

by in Wireless
‎Apr 12 2019 5:59 AM
‎Apr 12 2019 5:59 AM
Hi  kYutobi,   Thanks for your answer. Following your answer means i have to create a new Vlan on our Catalyst then use same Vlan on SSID, so give an IP to that Vlan as default gateway. Is this correct?   If not can you explain me how i can subnet 192.168.1.0/24 on Meraki MR42?   Also our workshop need at least 10 SSID with specific IPs, this is also why i need to manage the DHCP 😞   Thanks again.   ... View more

MR42 set up a different IP subneting

by in Wireless
‎Apr 12 2019 5:42 AM
‎Apr 12 2019 5:42 AM
Hi there,   I am quite new on networking and my company wants to replace our old Wifi system to Meraki MR42. I have one AP MR42 in the office for trial. It is connected to our Cisco Catalyst 3750.   I already setup dashboard and also i am able to to create a guest SSID and an internal SSID as Meraki documentation mention.   However for internal SSID i would like lease a different IP instead the 10.0.0.0/8. For example i would like to lease 192.168.1.0/24 or 10.7.13.0/24. Also i don't want to lease IP from our internal DHCP as we use them for wired connections and it running out quick.   I know i can use VLAN tagging for instance with ID 50 and setup the port as trunk.... However Does it mean i have to setup up our CIsco 3750 with the same VLAN 50? Honestly i don't want do many changes on our Switch Catalyst 3570.   I am sure i am missing something on the dashboard as basically what i want is setup my own SSID with own IP lease.   Can someone help?   Best Regards. ... View more
My Top Kudoed Posts
© 2025 Cisco Systems, Inc.