Meraki Community

TitusPullo80 · ‎Apr 12 2019

Thank you for the quick reply! There was a route that I needed to add in the route table on a server to be able to access from the client vpn network. This is resolved.

TitusPullo80 · ‎Apr 8 2019

Hello! I have a Meraki MX84 that is currently handling all DHCP for the busniess via VLAN1. I currently have the client VPN on our Meraki MX84 setup to pull dhcp from it's own scope (192.168.11.0/24). I would like to setup the client VPN to pull DHCP from VLAN1 (192.168.12.0/23) on the device. We have some in house applications that are coded to where they need to have this IP subnet (192.168.12.0/23) or the application fails to launch. Again, The VLAN1 subnet is, 192.168.12.0/23. The current client VPN subnet is 192.168.11.0/24. The Meraki is handling DHCP already but I just need to have that extend the DHCP from VLAN1 to the client VPN if that's possible. Thanks in advance, Titus.

Meraki Community

About TitusPullo80

TitusPullo80

Community Record

Badges

Re: MX84 Client VPN to pull DHCP from VLAN1

MX84 Client VPN to pull DHCP from VLAN1