Meraki

MattR · ‎Mar 20 2019

No such luck on support. We are running the free version with <100 SNMP sensors. I was just looking for a more versatile way to look at the data other than the defaults in dashboard. I'd like to be able to look at a more granular view than just 'past 2 hours/day/week/month'

MattR · ‎Mar 20 2019

Thanks for the reply. I did look at that. It only really tells you how to turn it on and troubleshoot the flow. The issue I'm having is everything is working and flowing but the packets from the MX are malformed. I read that there is an issue with 13+ firmware with ingress/egress of netflow and may not work with 'some' collectors but having now tried 2 I'm not convinced it isn't just completely broken.

MattR · ‎Mar 19 2019

I've setup our MX80 to send netflow updates to both PRTG and a ELK stack and both never seem to receive a template update from the MX. I grabbed packets at both endpoints and at the MX and do see netflow packets. I started digging deeper with wireshark and the packets are showing the following even after decoding as cflow: Has anyone successfully setup netflow with an MX running firmware 13+ ?

Meraki

Community

About MattR

MattR

Community Record

Re: MX80 Netflow > PRTG or ELK Stack

Re: MX80 Netflow > PRTG or ELK Stack

MX80 Netflow > PRTG or ELK Stack