Looking here, it seems like you can tag the Q-LAN traffic with DSCP 56 at the source:   https://q-syshelp.qsc.com/Content/Networking/QoS.htm   Then on the switches just trust DSCP ... View more

@JohnInge wrote: I just opened a support case myself regarding this. I first noticed that I only  had 100Mb Full Duplex, thanks for that tip. Changed the network cable and got 1GB Full Duplex. Then it showed 250Mb download/upload with cable connected. Throughput in Live Tools is 370. Using the cable that is connected to the MX65 in Internet 1 gives 500/500 every time.  So I am still wondering if it is normal that the MX65 takes this much of the capacity, when only one device is taking speed... will post if I get an answer from Meraki support.  MX65 can only push around 250Mbps throughput as a hardware limitation. See the sizing chart here: https://meraki.cisco.com/lib/pdf/meraki_whitepaper_mx_sizing_guide.pdf   That should be a limitation on the WAN interfaces, not LAN interfaces though if I'm reading it correctly.  So if you did say an iPerf test through two LAN ports it should go higher. ... View more

Hi there,   There isnt a voice vlan, which we shoudl implement. No meraki switches at site, just MX 65- MX68's. With the VPN, this is what I ant to set the QoS up on but just need some direction.   ... View more