I am trying to create L3 interfaces on a MS225, but am getting the following error:   "This switch does not support OSPF routing".    The switch does not support OSPF, but it complains that it needs the OSPF commands in the POST.     Is there another syntax I should try?   I have tried the following: { "name": "L3 interface", "subnet": "192.168.1.0/24", "interfaceIp": "192.168.1.2", "multicastRouting": "disabled", "vlanId": 100, "defaultGateway": "192.168.1.1", "ospfSettings": { "area": "0", "cost": 1, "isPassiveEnabled": true } }     { "name": "L3 interface", "subnet": "192.168.1.0/24", "interfaceIp": "192.168.1.2", "multicastRouting": "disabled", "vlanId": 100, "defaultGateway": "192.168.1.1", "ospfSettings": { "area": "disabled" } } ... View more