Yes, enabling load balancing will push both connections into an Active-Active state. Try to ensure you set your uplink speeds correctly as the load balancing feature will use the delta between WAN 1 and WAN 2s settings as a ratio for traffic management. Example WAN 1 is 100Mbs WAN 2 is 50Mbs That's a 2:1 ratio and thus 2/3rds of traffic will be pushed normally down WAN 1 and WAN 2 will take the remainder (unless there are other instructions to put specific types of traffic down one connection, or there's an outage.) Meraki wont split session traffic over 2 uplinks as well, so a voice call or download/upload will only use one connection at any one time, and not an aggregate of both. E.G. it doesn't make your speed 150Mbs but gives you that in throughput. ... View more