Meraki

Eman · ‎May 7 2019

We are in the process of removing an ASA that is currently NATting an interface that is not an Internet uplink. Our MX 250 already has 2 uplinks in use for redundancy. Is there a way to do a 1:many NAT on a non-Internet interface or make a third interface be an Uplink that will then allow for me to NAT over it? This is not actually going over the Internet for the NAT. It is going to another network that we do not control but requires us to NAT for services.

Eman · ‎Mar 25 2019

There is no mention of it in the release notes, but I can verify that it does make a difference in site-to-site VPN speeds.

Eman · ‎Mar 5 2019

After upgrading to the 14.39 Stable release candidate our internal speed as measured by iperf doubled on the upload to the main site from 7.6MB/s to 15MB/s

Eman · ‎Mar 4 2019

Is the 14.38 production ready or still in beta?

Eman · ‎Feb 28 2019

The remote is a MX67c and the main is a MX100. The speeds measured were using speedtest. The actual speeds within the network moving a file to and from remote and local machines was essentially unusable. We were able to pull the file at about 2MB/s but pushing it back from the remote was only moving at about 350KB/s. Update: We have put in a pair of WatchGuard T70's for the tunnel as a test and temporary until we can resolve the Meraki issue. These devices are having no issue with speeds.

Eman · ‎Feb 27 2019

We are trying to set up a tunnel to a remote site that currently has a 100Mb symmetrical connection but when we put in the VPN the connection gives 85 down but only about 12 up. The main site has a 600 Mb symmetrical. We tried changing the MTU on a client machine at the remote location but it did not make a difference. This is set up as a full tunnel with all traffic exiting at the main site.

Meraki

Community

About Eman

Eman

Community Record

Badges

1:Many NAT to VPN hosts

Re: Bandwidth Issue with Site-to-Site VPN

Re: Bandwidth Issue with Site-to-Site VPN

Re: Bandwidth Issue with Site-to-Site VPN

Re: Bandwidth Issue with Site-to-Site VPN

Bandwidth Issue with Site-to-Site VPN