Meraki

Ksyl · ‎Feb 15 2019

Thanks again, i will do that. And yes, both MS are running the same software and all ports have the same configuration.

Ksyl · ‎Feb 15 2019

Thank you for your help ! - Yes I have tried on another MS225 and it works perfectly. - Yes i have tried with another PoE device, a Yealink IP Phone (T42S) and it works too - There is nothing in the event log except "port status" - Here are the specs : https://www.hikvision.com/fr/Product/Detail/149574905159149/307639277371446 My first think is there is a problem with the first MS225 but, the MS is a new one through guarantee process.

Ksyl · ‎Feb 15 2019

Hi, I have a problem with my MS225. When I plug a PoE camera (HIK Vision) on port 4 all is fine. When I plug the same camera on port 5, no link go up. PoE is enable on both ports obvioussly. The problem is larger than that, i have to plug 6 cameras and only one of them wakes up. Every ports have the same configuration. When I change the cameras randomly on the same 6 ports, only the camera plugged on port 4 wakes up. I Don't really know what to do. Can you help me please ? Regards, Amaury

Meraki

Community

About Ksyl

Ksyl

Community Record

Re: MS225-48FP PoE HIK Camera

Re: MS225-48FP PoE HIK Camera

MS225-48FP PoE HIK Camera