Meraki

pdeleuw

Some time ago, you could block QUIC on the MX explicitly in content filtering. This option seems to have disappeared. You'll need to setup a L3 firewall rule and block UDP 443.

Randomizate

Thanks for the suggestions, I’m going to try them on some devices and I’ll share the results.

Kevin_Monsta · ‎Jan 4 2026

i tried with other AP using the same cable (same management configuration on switch) and it works

GIdenJoe · ‎Dec 15 2025

A Meraki AP can be connected to any kind of switch. However since the partnumber you mention is a data only switch (so no PoE switch) you will need a power injector or if your Meraki AP has a DC plug, then you'll need a DC power brick. For configuration just make sure if you use VLANs that the AP management VLAN is untagged (native) on the switch port and all needed user VLANs are tagged or allowed on the port.

Meraki

Community

About Kevin_Monsta

Kevin_Monsta

Community Record

Badges

Re: What is QUIC apps on User Usage

Re: Apple users lose authentication

Re: Access Point as reapeter

Re: AP Meraki connect to switch cisco C1300

Re: Apple users lose authentication