Meraki

Community

About jmartgli

Re: MR33 iPhone/iPads not getting Internet

by in Wireless
‎Jan 11 2019 4:25 AM
1 Kudo
‎Jan 11 2019 4:25 AM
1 Kudo
If one is connected i see it but  usually it doesn't stay connected for any more than a minute.   Wireless health just says devices are getting and association error. Association type='Association attempts' num='6' associated='true' radio='0' vap='1'     Looks like when i change the ip of the MR33 to static and make the DNS 8.8.8.8 & 8.8.4.4. The issue goes away.   Out of 52 locations only 2 locations have complained of this both are new devices only installed about a month ago.   As i said these are installed in home so max number of devices is 8-10 and one of the devices is our iPad mounted on the wall about 10 feet from the AP. As soon as i changed The IP to static and the DNS the problem when away. ... View more

Re: MR33 iPhone/iPads not getting Internet

by in Wireless
‎Dec 28 2018 10:15 AM
‎Dec 28 2018 10:15 AM
These have only 3-4 devices connecting to them as they are in homes.   We have 4 SSIDs being use One in Bridge Mode 3 in NAT mode   Users connecting to each complain of the issue with iPhones. The thing that gets me is we have 50 other MR32/33's that have been installed for 5 years identical configuration. Never had a problem and still don't but these new devices seem to be the only ones having the problem.   There is only one device in each home, and we have an iPad within 10 feet of the AP in Kiosk mode and that drops from all SSID's regularly     ... View more

MR33 iPhone/iPads not getting Internet

by in Wireless
‎Dec 27 2018 9:21 AM
‎Dec 27 2018 9:21 AM
Hi   We just installed a few MR33's all in residential homes connected to a cable modem. I've had multiple people complain that they connect to the networks fine but they will drop and and the network will show "No Internet Connection" It seems to be an iOS device problem as i can see the AP's connected and there are Android and windows devices connecting with no issue.   We have about 30 other MR32/MR33's connected exactly the same for years and never had an issue.   I spoke with support a few times they had me create a new Radio Profile with the following settings - Client Balancing OFF - 2.4Ghz Radio Transmit Power Range Set to 15dBm - 30dBm - 5Ghz Radio Transmit Power Range Set to 15dBm - 30dBm   Everything else is the same as the Default Indoor Profile.   Clients still have issues   Meraki Support wants me to have a Mac device with their packet analyzer running to see whats happening, problem is I'm 7 hrs away from these locations. No one at those locations are technical enough to help   Anyone else run into issues with internet dropping on iOS devices   Thanks   Jeff ... View more
My Top Kudoed Posts
© 2024 Cisco Systems, Inc.