Hi mattvirus   I've not heard anything from Meraki since we had a short conversation by mail. They asked a single time about, if it still was a problem - and i kindly told them, that it's still a problem.   Could anyone please take the proper steps to fix this?   I've seen a lot of ESP8266 + Meraki problems, and after Googling a bit, it's petty clear that it's a combination of a mishandling in the ESP-chip, but also maybe a bit to hard handling by the Meraki device. So i would love to have that fixed, so our devices can stay connected.   I've also tried to test a NodeMCU on the network, and that's the same. It won't connect to our network. However, it's joining my private hotspot with no issues what so ever.   So please......     https://github.com/espressif/arduino-esp32/issues/1245 https://help.konnected.io/support/discussions/topics/32000001234/page/2?url_locale= https://www.letscontrolit.com/forum/viewtopic.php?t=4927 ... View more

Hi mattvirus   I've sent you a private message. Please take a look at it - and answer by mail. I'll forward all needed information, but i'll also like to secure that you're actually from the Cisco-team, before i repose all our information to a stranger.   Thanks! ... View more

I had raised two supportticket to them - however they just blame our DHCP service (powered by PFSense).   If i swap the Meraki device with our old ASUS device as AP, the ESP devicds connects without any issues, what so ever.   With that said, i'm able to connect our devices, if i skip the IP mapping, but that's only an option, cause all our ESP devicss now supporting MQTT.   All at Meraki still blame my setup (DHCP), but i'm sure that it's but in the AP's.   EDIT: Damn auto-corrections. Will leave them here, like the bugs in the Meraki AP's 😉 ... View more

Hi @mazevedo   I'm facing the same issue, and have selected WPA2 only. It doesnt' work. I can also see DHCPDECLINE in my DHCP-logs, but this only happens if the Meraki-AP is hosting the devices, so i guess it's a question about the current configuration of the Meraki-AP.   Are you able to share the rest of your settings?   Fx. Minimum bitrate (Mbps), Client IP assignment and fx. support for 802.11r /802.11w.   Thanks! 🙂 ... View more

I have problems with the ESP-chips, too.   The wierd thing is is that it's working just fine the first time the device calling the DHCP-server, and recieve 10.0.0.128 - but after this moment, it's DHCPDECLINE over and over again. However the `deauthentication` is also present in our logs for the ESP-devices. Our AP's is in bridge-mode, and they have the 2.4 GHz-option (and it's enabled) for the SSID - and all ESP-chips are trying to connect to the 2.4GHz SSID. But it doesn't help. WPA1 and WPA2 vs WPA2-only is, sadly, the same story. The ESP-chips works just fine on one of our old and dump ASUS AP's - no problems at all... The devices works fine without static DHCP-mapping in pfSense (dhcpd), so temporary we manage to just use fx. SonOff's with the MQTT-protocol, but it's not an option for some of our other devices, fx. a few ESP-based smart light-bulbs. ... View more