Meraki

JLHG

We will need HA site to site VPN in place at least in the short term. May eventually switch to an Azure vMX instead. Not sure if that alleviates the need for vIP. You say it might work if I only have one plugged in at a time. Would that be the case for both ISPs or could I just have the backup connected to the primary MX like below and configure vIP on the primary ISP? That would mean the primary MX and the primary ISP would have to both fail for an outage to occur. That's acceptable for us if this could work.

JLHG

I'm trying to plan out an HA MX deployment. We have 2 ISP connections. Our primary has 3+ static IPs for virtual IP mode. The secondary only has one static IP. Can I configure the primary with a virtual IP on both MXs, and then configure the secondary with the same IP on both? If that won't work, can I configure the primary in virtual IP mode and then configure the secondary ISP only on the primary MX? Thanks!

Meraki

Community

About JLHG

JLHG

Community Record

Badges

Re: MX - Asymmetric HA WAN Configuration

MX - Asymmetric HA WAN Configuration