@BaskaranGanesan    on the 15th last month, mr31.1.7 was released as release candidate. in the changed log, there is a mention of <code 0 : reserved> being fixed. we upgraded but we are still having the same behaviour.   drivers version that we have tested :   these are the drivers that we tested until we found that Apple iOS is exhibiting the same behaviour previously. 22.120 : totally unable to detect 6GHz band 22.130 : totally unable to detect 6GHz band 22.140 : totally unable to detect 6GHz band 22.150 : totally unable to detect 6GHz band 22.160 : totally unable to detect 6GHz band 22.170 : able to detect 6GHz band but exhibit the same behaviour 22.180 : able to detect 6GHz band but exhibit the same behaviour 22.190 : able to detect 6GHz band but exhibit the same behaviour 22.240 : able to detect 6GHz band but exhibit the same behaviour 23.50   : able to detect 6GHz band but exhibit the same behaviour   after we upgraded to mr31.1.7, we tested the 23.130.1, Intel latest. same behaviour          ... View more

We are the same, also in contact with TAC. Previously we tested, iPhone and Android, same issue, we think it’s may not be related to Windows OS drivers  ... View more

i see, may i ask, have you found a solution for this problem? ... View more

hi,   sorry for this delayed reply  was doing testing  we are running 30.7.1 for meraki we found that even laptop was station and it didn’t jump AP, the failure will occur  we are in contact with meraki we have asked their help to do simulation at their eng lab to see if they can replicate this behaviour  the intel ax211 driver that we are running is v23.90 which is the latest  we fresh install windows and let Microsoft auto install the WiFi nic driver, it’s installing v23.60. > same behaviour  we tested dell’s driver, the latest is v23.60 > same behaviour  ... View more

hi @VivekT    according to meraki documentation, if we need to use 6Ghz, we can't use wpa3 transition mode we have tried also, it can't connect for wpa3 personal, our option is only pure wpa3-sae we can't go wpa3 enterprise either ... View more

hi, our Cisco 9164 and 9162 are having the same exact error our meraki dashboard states that “our Intel ax211” clients are experiencing “failure to associate” we tried using 5GHz only with wpa3-sae, no issue but when we only use 6Ghz only with wpa3-sae, the issue occurs the behaviour is the same with @Alex123 the error occurs when users 1st power on their laptop and did a 1st time connect with our ap and it will occur also when our clients are roaming    ... View more