Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About murphytb2
murphytb2
Comes here often
Member since Oct 14, 2024
Oct 17 2024
Community Record
6
Posts
0
Kudos
0
Solutions
Badges
Oct 14 2024
2:19 PM
Did PCAP. It shows traffic from firewall hitting port 47 and port 23 (modem connection), but receiving no traffic from Cox. Cox states that they look at their modem, they don't see anything connected to it. I know the cable is good, we connected a laptop to it and connected to the internet. Tried another port on Meraki, no change.
... View more
Oct 14 2024
1:54 PM
Cox modem is setup for static IP. Turned off POE. no Change Firewall switch port and Cox modem are using same VLAN. This was working for about a month and just stopped. Connect laptop to same cable to modem no issues accessing internet. Plug cable back into switch no Internet connectivity. Cox changed out modem, say no issues with their side. If I put and old switch between the Firewall and Meraki, the connection comes up. No difference in port config. auto/auto vlan xxx no poe access port I configured a another on Meraki switch and that didn't make a difference either.
... View more
Oct 14 2024
1:07 PM
I put a Meraki MS355 switch between my Firewall and the Cox modem and it will not connect. Take a laptop using same cable and IP on firewall interface. I connect with no issues. Plug the cable back into switch port no connectivity to internet. I've rebooted Cox modem. No change. The thing I noticed is the Layer 2 port on Meraki switch is showing random IP addresses. Like the switch is acquiring an IP address from Cox.
... View more
© 2025 Cisco Systems, Inc.
