Meraki

nakarin · ‎Apr 10 2019

In case i'm disconnect all port on switch and recheck physical port and cable. Then i'm reconnect one by one port for analyse CRC error. But after reconnected all port CRC error not happening again. I think cause of issue is physical problems.

nakarin · ‎Mar 25 2019

@NolanHerring @BrechtSchamp Thank you so much for the suggestions. I will check according to your suggestions.

nakarin · ‎Mar 24 2019

I have problems with Switch Meraki MS225 and MS410 My Network using MS410 is core switch and using MS225 is access switch connect across buildings with fiber optic cables. The Problem is port on MS410 used connect with MS225 is alert "Very high proportion of CRC errors Meraki Switch" on this port. Then port MS410 is disconnect to MS225 and MS225 light status change from white light to orange light. Anybody have any experience troubleshooting CRC error issues. Thank you very much

nakarin · ‎Jan 7 2019

Hello. My customer need to use windows file sharing across multiple subnet but it have problem about hostname fIle server. In case if client and file server inside same subnet we will access via ip address and access via hostname without problem but if client and file server not inside same subnet we will access via ip address only. But my customer need to access file server via hostname. I tried to use WINS server but I don't know how to combined WINS server to meraki network. Any help would be greatly appreciated.

nakarin · ‎Sep 18 2018

Speed to use web browser, youtube and streaming is OK maybe not problem from interference.

nakarin · ‎Sep 18 2018

Thank you for response. I have MR42 2 devices and MR42E 3 devices of 150 client device. I get speed 300 kbps of transfer file 200 MB via wireless to wireless. I'm not sure both are on the same band 5 ghz. SNR 30-40 dB in dashborad. I'm thinking it's possible to have problems with SMB protocol for transfer file.

nakarin · ‎Sep 18 2018

I have problems with file transfer via wireless MR. In case I'm connect client(A) via wireless MR and client(B) connect wireless too. I'm start file sharing in client(A) and define client(B) receive file from client(A) is so slowly. But in case I'm connect client(A) via wireless MR and client(B) connect via LAN port on Switch MS in same network-wide speed transfer file is not problem. Any help would be greatly appreciated.

Meraki

Community

About nakarin

nakarin

Community Record

Badges

Re: Very high proportion of CRC errors Meraki Switch

Re: Very high proportion of CRC errors Meraki Switch

Very high proportion of CRC errors Meraki Switch

File Sharing across multiple subnets

Re: File transfer via wireless MR is so slow

Re: File transfer via wireless MR is so slow

File transfer via wireless MR is so slow

Re: Very high proportion of CRC errors Meraki Switch