Hi @jsmith722, As it was mentioned by folks above, there is no native solution in Meraki to limit the amount of clients per AP, so in this case it will be always the client decision to which AP to connect. With this in mind, key to the correct client distribution between APs is wireless design.   Here are a couple of KBs that can help you understand what settings can be used to control RF environment: https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MR_Wireless/High_Density_Wi-Fi_Deployments https://documentation.meraki.com/Architectures_and_Best_Practices/Meraki_Wireless_for_Enterprise_Best_Practices   If you have a high density deployment, make sure to conduct post-deployment site survey to validate the RF environment. ... View more