If you install an SSL certificate on Android devices then you need to go through the following steps. Please note that these steps may vary slightly depending on the Android version and device model.   1) Obtain the SSL Certificate 2) Transfer the Certificate to the Android Device 3) Open Settings on the Android Device 4) Find the Security or Certificates Section 5) Install the Certificate 6) Locate and Select the Certificate File 7) Configure Certificate Settings 😎 Set up Credential Storage Password 9) Complete the Installation 10) Verify Certificate Installation   Note:- If you are deal with SSL Certificate for a specific application then those time applications may have their own certification installation procedure.   If you are not getting proper results please I will refer to this blog. https://www.ssl2buy.com/wiki/ssl-configurations-installations ... View more

We know very well "MV72" refers to a specific Meraki product, likely its called security camera or network device. If the SSL certificate expiring for this device then you should be follow the Meraki's specific procedures for renewing SSL certificates.   You can follow this process or contact Meraki support for device-specific instructions.   Access the Meraki Dashboard Navigate to Security Appliance Settings Check Certificate Expiry Renewal through Meraki Dashboard Generate a New Certificate Signing Request (CSR) Submit CSR to Certificate Authority Complete Verification Steps Receive and Install the Renewed Certificate Verify Certificate Installation Check this blog you get more ideas about this https://documentation.meraki.com/MV/MV_Smart_Camera_FAQ   ... View more