Hi Ryan, I cant seem to attach anything on here sorry. What we have set up is a Store Network 10.x.x.x. On this sits the MS120 with various devices running from this such as MR33 AP's etc. On port 5 on the MS we have a Cable attached to the MX68 on Port 3. The MX device is on another Meraki Network (192.168.0.1/24) and the idea is should our main circuit on 10.x.x.x go down we would power off the main router and enable Port 3 on the MX68 which if it had cellular would take over. In this case the MX is struggling with cellular. So before any of this happens somehow the MX68 is handing out DHCP addresses to devices connected to the AP's on the MS120 - even though the Port 3 on the MX is disabled? We have this exact set up in other locations and are not seeing the same issues, the difference being that these have good cellular signal. We are making assumptions that where we have no cellular the MX is somehow connecting to the MS but we cant see any logs as to how or why. Hope this makes sense!! Rich
... View more
