Hi, I was trying to run just plain simulation of Signal Coverage patterns on Ekahau for CW9166 and MR57 and match the propagation patterns with Datasheets just to see how good they are when being compared to datasheet Coverage patterns. Please note , i have done plain simulation which no walls , no attenuation , etc. Did it with 6mw for 2.4Ghz and 25mw for 5Ghz and 6Ghz as Tx power. Based on Published gains for MR 57 (4.5 dBi gain in 2.4 GHz, 5.5 dBi gain in 5 GHz, and 5.5 dBi gain in 6GHz) and CW9166 (3 dBi in 2.4Ghz, 5dBi in 5Ghz and 4dBi in 6 Ghz) , what i felt is 2.4Ghz & 6Ghz for both access points are more or less same but 5Ghz is showing more difference in terms of coverage although there is only 0.5dbi Difference in both. So looking here your thoughts on it. Also can anyone tell based on your experience which one is better MR57 or 9166 other than the little difference in Gain and that 9166 is supported on both platforms like Meraki and on-prem ( WLC based). Do they both have any other major difference?     @MR57 ... View more