Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About khurram
khurram
Here to help
Member since Sep 10, 2017
Sep 15 2021
Community Record
66
Posts
0
Kudos
1
Solution
Badges
Sep 7 2021
11:05 AM
Hello, Yes i did the same as you mentioned and L3 Firewall is also enabled and allow any any is set but no effect. I'll be grateful to you if you share screenshots.
... View more
Sep 6 2021
10:36 AM
@cmr Yes i have divided the subnet. WAN IP: 192.168.120.0/30 LAN IP: 192.168.120.4/29 etc.... but still i cannot access the IP 192.168.120.6 which is on device from outside.
... View more
Sep 6 2021
7:38 AM
Hello, i have assigned Public IP e.g. 192.168.120.2 to my WAN interface and rest of the pool 192.168.120.5 to my LAN interface and also disable NAT on that interface but still i cannot access the IP from outside.
... View more
Aug 29 2021
10:51 AM
thanks for the reply i do not want to assign private IP and use 1:1 Nat i want to assign Public IP to any device/server etc.
... View more
Aug 29 2021
7:30 AM
Hello Members, I have purchased /24 Public IP Pool from my upstream service provider. UP link is 1st terminated in the switch and than one cable from the switch terminated on the WAN interface on MX and Public IP given on WAN interface and MX is online. Now my question is how do i use my rest of Public IP Pool through Meraki? I want Public IP Pool routed from meraki. Thank you
... View more
Jan 15 2020
5:23 AM
yes you are wright. Like we do in cisco router e.g. interface 0/1 ip address 192.168.0.1 255.255.255.0 ip address 192.168.10.1 255.255.255.0 secondary
... View more
Jan 14 2020
12:50 PM
Hello, Can we assign secondary subnets on an interface like we do in cisco? Is it possible in Mx?
... View more
Oct 30 2019
1:52 PM
Greetings, I want to establish that spoke-2-spoke communication in a VPN tunnel. I am using MX600 in my HO and i.e. HUB. on 2 locations using MX65w - Spoke & on 2 locations using cisco router. All 4 sites are connected with HO through VPN but spoke cannot communicate with other spoke. Kindly help me to fix this issue.
... View more
Apr 6 2019
7:10 AM
if i create subnets in Security Appliance with different VLAN and placed unmanaged switches in front of every subnet will this work for me?
... View more
Dec 18 2018
1:13 PM
Kindly guide me how to redirected to playstore app in android phone.
... View more
Hello all, I am deploying hotspot for a Client on different locations. Client has a software on Play store and icloud. Client has a requirement is that whenever a customer access the free internet a designed splash page appear and force the customer to download the software first. Please help. Thanks in advance.
... View more
May 7 2018
2:34 PM
I have setup GRE Tunnel between Cisco 2900 series router. Tunnel is working fine without putting one of the router behind the NAT device. Kindly guide me what sort of settings needs to be done in MX65W NAT.
... View more
May 4 2018
1:08 PM
@Korey wrote: Ok, with that in mind it's tough. Reach out to your admins and ask who made a change. No one is accepting it. Thx.
... View more
May 4 2018
12:58 PM
no its a single DHCP server. @BrandonS wrote: Are you trying/Intending to run two different DHCP servers? Why? It sounds like maybe you saw an error in the event log about DHCP server conflict and one was shut down? Screenshot?
... View more
May 4 2018
12:49 PM
it is not the relay agent. I have setup the DHCP server in MX65W which is connected with MS220 and users are connected with the switch too. Someone disable the DHCP server in switch->DHCP server and blocked the MX65w in there. One thing more kindly guide me how to setup the below forma
... View more
May 4 2018
12:33 PM
event shows in event log not in the change log. @Korey wrote: So the change shows up in the change log but without an Admin associated to that change?
... View more
May 4 2018
12:11 PM
someone disable the DHCP server from my MS220. In event log i have identified the time but user information is no appearing. There is no log in change log. @Korey wrote: The Change Log would be the spot to identify changes made to the network. You could then cross reference the time and user and look at the Organization -> Login Attempts page to identify the source IP address the user logged in from.
... View more
May 3 2018
10:58 AM
not appearing in change log i already have checked that. @BrandonS wrote: Organization > change log
... View more
May 3 2018
10:49 AM
how to find login information in event logs means to know that who has change the settings. Also wants to know how to check the source IP address of a session.
... View more
Apr 24 2018
7:20 AM
i am using voip services and i haven't dial any international number but my SIP provider called and informed me that lots of international calls were made from your side in few days but i haven't dial any than how comes it possible? kindly guide me how do i check in my security appliance and how to prevent such attack in future.
... View more
Apr 23 2018
11:17 PM
One of my public IP was hacked last night kindly guide me how do i check that hackers IP and what data they have accessed and how to prevent these kind of attacks in future.
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 4093 | Apr 23 2018 11:15 PM |
© 2024 Cisco Systems, Inc.
